DTF After the Print Workflow

This document shows the BN-20D and BY-20 workflow after the print is complete. Powdering, melting, and heat pressing are covered.

14.17 MB

DTF Layer Alignment with VersaWorks

This document provides information on how to adjust the color and white layers for a properly aligned print. Alignment when using VersaWorks is featured in this document for the BN-20D and BY-20

4.93 MB

DTF Printer Calibration with Utility

This document covers the use of the Utility to calibrate printer for proper print and layer alignment. Bidirectional printing and sheet feeding adjustments are described. It was written for the BN-20D but it applies to BY-20 as well.

3.97 MB

FAQ After the Print with VersaWorks

This document has an FAQ for the post print workflow for the BN-20D and BY-20. It has specific notes for VersaWorks. It was written for the BN-20D but all of it applies to the BY-20 as well.

24.26 MB

Removing Moisture from DTF Prints

This document provides information for preventing and removing moisture that may develop on transfers.

15.61 MB

BY-20 Firmware Update

BY-20 Firmware Update. This link will take you to the Roland DG Download Center for the BY-20. Click on the Software Box selection near the middle of the page and then navigate down to BY-20 Firmware section to show the latest updater version.

30.86 KB

BY-20 User Manuals

BY-20 User Manuals. This link will take you to the Roland DG Download Center for the BY-20. Navigate down to find the User's Manual, Maintenance Guide, Safety Precautions and the "Getting Started" Manual.

30.72 KB

VersaSTUDIO BY-20 Nozzle Recovery Procedure

This document guides the user through steps to troubleshoot and recover missing nozzles on the BY-20 printer

11.87 MB