Technical Support for
IU-1000F Industrial Flatbed Printer
Featured Articles
Search IU-1000F Documents & Knowledge Base Articles
Expand All | Collapse All
Application Resources ( 2 )
Archiving Jobs in for the IU-1000F will be imperative. Between the SAi RIP and the Roland Print Control Center RPCC, disk space will be important to manage.
516.00 KB
Maintenance & Calibration Guides ( 1 )
This IU-1000F manual covers all daily maintenance procedures
2.47 MB
MSDS ( 10 )
This is the GREENGUARD Gold Certification for IU-1000F Specialty inks.
279.58 KB
This is the GREENGUARD Gold Certification for the IU-1000F Standard UV inks.
283.46 KB
Owner & User Manual ( 2 )
Setup & Install Guides ( 1 )
Software Guides ( 6 )
How to use apply White-Gloss-Primer in the SAi RIP II
3.05 MB
Color Management is a broad and relatively complex topic, but in this document, we are going to review the best places to start managing the color output on the IU-1000F.
1.00 MB
This document is not the definitive guide to creating output or media profiles. It is intended to be a GUIDE to making profiles when using the Color Profiler included in the SAi Bundle with the IU-1000F.
1.59 MB
Inside the Roland Print Control Center RPCC there are some nice shortcuts that make navigating through the software much easier. Some of the shortcuts are very good, but there is one that should be avoided Ink Charge Do NOT use.
800.71 KB
To use WhiteGlossPrimer on the IU-1000F through the SAi RIP, the original files Adobe Illustrator, Corel Draw or Adobe Photoshop must have a Spot ColorSpot Channel named for the specific Specialty Ink being used.
1.75 MB
This document describes various printing functions that can be set on the Properties screen in the Roland Print Control Center RPCC by double clicking the printing task.
980.98 KB
Software Updates ( 3 )
IU-1000F Print Control Center 1122
Roland Print Control Center update
36.46 MB
Roland Print Control Center (RPCC) Version 1.1.2.5. Please read the included documentation before attempting to upgrade your application.
36.97 MB
File and instructions for updating the Roland Print Control Center (RPCC)
36.98 MB
Knowledge Base Articles ( 14 )
When performing an autodetect for media thickness, the printer pauses and lowers the carriage before moving to the target location, after the "Move to Destination" button is clicked.
Print from IU-1000F with bad banding in clear and skewing of image.
When attempting to move the carriage - the printer throws an Error Code 6 indicating that the print carriage is too low.
Cannot get gloss to print when outputting through Roland Print Control Center
When printing on IU-1000F, the printer hisses much louder when printing the second side.
Error Codes with causes and solutions for the IU-1000F
The following steps should be taken when powering down the IU-1000F system. It is important that these steps are followed correctly to insure proper shut down.
The following sequence should be followed when powering up the IU-1000F printer and Print Control Software. It is important that this procedure is followed correctly to insure proper operation of the printer. This procedure should be the first step when troubleshooting any Error Codes the printer displays, unless otherwise noted.
When I make a selection like profile, or spot color, Production Manager does not seem to hold my choices.
Tech Support Terms and Conditions
Expected shelf life of Roland inks, including expiration and storage condition information.
Assigning the correct spot color to your designated colors.
How do I print white/gloss/primer in Production Manager?
Tech Support Terms and Conditions