Technical Support for
SOLJET Pro II SJ-640EX 64" Eco-Solvent Inkjet Printer
Featured Articles
Error code 0110 (service call)Roland Product End of Life Policy
Search SJ-640EX Documents & Knowledge Base Articles
Expand All | Collapse All
Application & Software Guides ( 4 )
Ink conversion procedure for upgrading to EcoSol Max inks. ColorRip Edition
46.83 KB
Procedure for Print - Laminate - Cut in Roland ColorRip
247.44 KB
Print Laminate Cut workflow for the SP-300 printer using ColorRip
794.94 KB
Windows 7 Support Information for color products: VersaWorks, COLORIP, ColorChoice and ColorChoice II.
75.52 KB
Bulletin ( 1 )
This file will assist in color matching on a Roland device. Print the file in your device the pick the closest match and then input the color values back into your design file.
392.38 KB
Firmware ( 1 )
This zip file contains firmware for the Pro2 series printers. Zip file also includes updater application, firmware file and instructions.
2.56 MB
MSDS ( 4 )
This is a conformity statement to EUs RoHS directive for the ESL3 inks. EcoSOL MAX - ESL3-CY, ESL3-MG, ESL3-YE, ESL3-BK, ESL3-LC, ESL3-LM, ESL3-WH, ESL3-4CY, ESL3-4MG, ESL3-4YE, ESL3-4BK, ESL3-4LC, ESL3-4LM
65.54 KB
Conformity statement to EUs RoHS directive for the SL-CL SOL Cleaning cartridge
39.29 KB
Owner & User Manual ( 9 )
Guidlines for Creating an ICC Profile in ColorRip Software
882.01 KB
User manual for the TU-2 take up system. Manual includes usage and installation procedures.
2.06 MB
Instructions on how to install and operate the TUC-2 take up system. Updated to include special instructions for the VG-640 VG-540.
2.48 MB
User ManualGuide for SJ-540,SJ-640, SJ-740, English. Manual includes operating instructions and basic troubleshooting.
1.27 MB
Details operation and installation of the Roland Color RIP 2 software. user guide
1.02 MB
Details proper use and set up of the add-on heater unit for the SC-540 that are converted to EX. Power specifications also included. HU-500, HU-501, HU-600
251.93 KB
Users manual for installed heater kit on SC-540, SJ-645 and SJ-745 machines. Details set up, changing heat settings and safety features. Heater models HU-540, HU-640 and HU-740
659.88 KB
Profiles ( 2 )
Profiles for Color RIP 2.0b for waterbased PRO2 printers and printer cutters, FJ-540, CJ-540
0.00 bytes
All profiles set up for the PRO2 and Color RIPv2.0. Multiple profiles for lc lm, Max Inks for Color RIP
0.00 bytes
Software Updates ( 1 )
Training Videos ( 2 )
Video covers Network Connectivity with a Roland printer or printercutter using InterCon-NetTool AJ, AJi, SP, SJ, FJ and SC series models only
51.85 KB
Follow this link to the Roland Academy Webinars On-Demand webpage. Then filter through the videos to find a training session that suits your needs.
57.43 KB
Troubleshooting Guides ( 1 )
How to VerifyReset the TCPIP Connection. For all nework based printers.
2.02 MB
Utilities ( 1 )
Nettools for determining and setting IP address for SP version VersaCAMMS and Pro II printers.
4.69 MB
Knowledge Base Articles ( 27 )
COLORIP Guide
The cut path is being clipped on one side of the print
Encoder related failure in the scan direction
How to troubleshoot white banding (or density drop, streaking, ink starvation)
Is there a way to stop a headwash?
Unable to install the Cut Studio Plugin on a MAC
Motor Error 0001
Motor Error 0004
Motor Error 0005
Motor Error 0008
Motor Error 0009
Motor Error 0010
Motor Error 0040
Motor Error 0050
Motor Error 0080
Motor Error 0090
My Roland printer is reading the full width of the platen bed even though I loaded a smaller roll
My VersaWorks is freezing or crashing
Information about my legacy product
Roland VersaWorks Guide
Service Call 0109
SERVICE CALL xxxx
Can I use either of these cleaning cartridges interchangeably?
The heater temperature goes up to higher than the preset temperature. (Both displayed temperature and actual temperature become higher.)
VersaWorks Measurement Failed Error Code = - 4087
When outputting a design to your printer, the software needs to be able to translate commands to the device (such as how much ink to fire and when). These commands tell the machine how fast to feed the material, at what speed the print carriage travels, and what heat settings are needed for the print platen. Other variables include theproperties of thematerial being printed on, how the ink chemsitry reacts to it, how the different process colors of ink blend together to form other colors, and how long the print takes to dry. A Profile is a combination of all of these variables, among others.
Windows 7 Software Compatibility List