Technical Support for
VersaUV LEF2-200 20" UV Benchtop Flatbed Printer
Featured Articles
Preparación de las Impresoras de Inyección de Tinta Roland para Periodos de InactividadPreparing Roland Inkjets for Periods of Non-Use
Roland DG VersaWorks 6 Install page
VersaWorks 6 Upgrade
Search LEF2-200 Documents & Knowledge Base Articles
Expand All | Collapse All
Application Resources ( 4 )
Test result of Adhesion Promoter or Primer for VersaUV printers
486.30 KB
The CoPeck utility version 7.7.0 can be used to pull a report from a Roland printer and then be emailed to a dealership or service center for diagnostic purposes.
7.79 MB
Copeck Utility – Instructions about using the CoPeck tool. Includes the list of Roland Printer models.
385.60 KB
Firmware Updates ( 2 )
This zip file contains firmware for LEF2-200 printer. Zip file also includes updater application, Firmware file and instructions on installation.
3.17 MB
This zip file contains firmware for LEF2-200 printer. Zip file also includes updater application, Firmware file and instructions on installation.
3.17 MB
Maintenance & Calibration Guides ( 2 )
LEF2-200 Maintenance Guide. Important facts steps on how to maintain the LEF series printer
8.59 MB
VersaUV LEF2-200 Maintenance Guide Spanish
Guia de Mantenimiento Regular
8.61 MB
MSDS ( 11 )
This is the GREENGUARD Gold certification for Eco-EUV inks.
279.57 KB
This is the GREENGUARD Gold Certification for Eco-EUV4 inks.
279.57 KB
This is a conformity statement to EUs RoHS directive for the EUV inks.
EUV-CY, EUV-MG, EUV-YE, EUV-BK, EUV-WH, EUV-GL
281.46 KB
Owner & User Manual ( 2 )
Service Manual & Notes ( 1 )
Setup & Install Guides ( 3 )
VersaUV LEF2-200 Setup Guide in Spanish.
Guia de Configuracion
6.23 MB
Please follow these easy steps to assemble your Rotary Rack cylindrical printing accessory for the Versa UV LEF series of printers.
783.26 KB
Software Updates ( 3 )
This document includes links to VersaWorks Support Pages, the VersaWorks 6 Upgrade page. Also, included are links to troubleshooting documents, software system requirements and the compatibility list.
137.32 KB
Use this updater if you are running VersaWorks version 6.0 or later . After applying this update, you can update to the latest version either Online or by applying the latest offline updater.
47.02 KB
Training Videos ( 5 )
This video will show you how to assemble your Rotary Rack cylindrical printing accessory for the Versa UV LEF Series
43.22 KB
Troubleshooting Guides ( 4 )
This document will go over all aspects when encountering a corrupt file.
1.95 MB
This troubleshooting document will describe the possible causes for horizontal banding
3.65 MB
How to VerifyReset the TCPIP Connection. For all nework based printers.
2.02 MB
This troubleshooting guide will review different aspects of color variations.
2.58 MB
Utilities ( 1 )
Knowledge Base Articles ( 15 )
A summary of links to relevant BOFA product information for units that support LEF/LEC/LEJ model printers as well as Roland Dental devices.
Firmware update for LEF model printers to support Rotaprint devices
Image is split into pieces when adjusting table size in Versaworks. when table size is readjusted to fit artwork, image remains broken into pieces on artboard
Printer does not recognize a new ink cartridge or customer has a faulty ink cartridge that causes printing issues.
Las impresoras de inyección de tinta Roland han sido diseñadas para permanecer inactivas solo durante breves periodos de tiempo. Cuando no está siendo usada, cada impresora lleva a cabo un mantenimiento automático. Sin embargo, hay algunas situaciones que requieren periodos prolongados de inactividad, especialmente en entornos educativos. Es importante preparar correctamente estos dispositivos para largos periodos de inactividad con el propósito de evitar daños y garantizar que estén en perfectas condiciones de producción al momento de imprimir nuevamente.
Roland inkjet printers were designed to accommodate short periods of downtime. Each printer performs automated maintenance when the machine is not in use. However, there are some situations that require extended periods of downtime, this is especially true in educational settings. It is important to properly prepare these devices for extended downtime to prevent damage and to ensure that your machine is in perfect production shape when you’re ready to start printing again.
Documentation and Training Videos on using the RotaPrint rotary device on LEF model printer.
Manage your print output with the latest edition of the world’s most popular RIP software.
Modifications to the LEF2 model printers are required when using the RotaPrint device.
Can I use either of these cleaning cartridges interchangeably?
Spot color with transparency warning appears when trying to save a file to eps in Adobe Illustrator
Interested in upgrading to VersaWorks 6
When outputting a design to your printer, the software needs to be able to translate commands to the device (such as how much ink to fire and when). These commands tell the machine how fast to feed the material, at what speed the print carriage travels, and what heat settings are needed for the print platen. Other variables include theproperties of thematerial being printed on, how the ink chemsitry reacts to it, how the different process colors of ink blend together to form other colors, and how long the print takes to dry. A Profile is a combination of all of these variables, among others.
Colors are not matching from one panel to the next when printing tiled images
When outputting the CMYK print file and Gloss print file separately, the CMYK print does not match the Gloss print in feed direction. Why?