Technical Support for
SOLJET Pro II SC-540 54" Eco-Solvent Inkjet Printer/Cutter
Featured Articles
Roland Product End of Life Policy
Search SC-540 Documents & Knowledge Base Articles
Expand All | Collapse All
Application & Software Guides ( 5 )
Ink conversion procedure for upgrading to EcoSol Max inks. ColorRip Edition
46.83 KB
Instructions for creating Contour Cut lines in Adobe Illustrator CS
168.72 KB
Procedure for Print - Laminate - Cut in Roland ColorRip
247.44 KB
Print Laminate Cut workflow for the SP-300 printer using ColorRip
794.94 KB
Windows 7 Support Information for color products: VersaWorks, COLORIP, ColorChoice and ColorChoice II.
75.52 KB
Bulletin ( 1 )
This file will assist in color matching on a Roland device. Print the file in your device the pick the closest match and then input the color values back into your design file.
392.38 KB
Firmware ( 1 )
This zip file contains firmware for the Pro2 series printers. Zip file also includes updater application, firmware file and instructions.
2.56 MB
Maintenance & Calibration Guides ( 1 )
Details how to perform the end user level print cut adjustment to correct print cut alignment issues.
1.37 MB
MSDS ( 4 )
This is a conformity statement to EUs RoHS directive for the ESL3 inks. EcoSOL MAX - ESL3-CY, ESL3-MG, ESL3-YE, ESL3-BK, ESL3-LC, ESL3-LM, ESL3-WH, ESL3-4CY, ESL3-4MG, ESL3-4YE, ESL3-4BK, ESL3-4LC, ESL3-4LM
65.54 KB
Conformity statement to EUs RoHS directive for the SL-CL SOL Cleaning cartridge
39.29 KB
Owner & User Manual ( 10 )
Guidlines for Creating an ICC Profile in ColorRip Software
882.01 KB
Exploded diagram detailing where parts are placed and how to properly repack the SCCJ 540 model in the box it shipped with.
325.50 KB
Details set up, operation, cleaning and minor troubleshooting for the end user level.
1.48 MB
User manual for the TU-2 take up system. Manual includes usage and installation procedures.
2.06 MB
Instructions on how to install and operate the TUC-2 take up system. Updated to include special instructions for the VG-640 VG-540.
2.48 MB
Details operation and installation of the Roland Color RIP 2 software. user guide
1.02 MB
Details proper use and set up of the add-on heater unit for the SC-540 that are converted to EX. Power specifications also included. HU-500, HU-501, HU-600
251.93 KB
Users manual for installed heater kit on SC-540, SJ-645 and SJ-745 machines. Details set up, changing heat settings and safety features. Heater models HU-540, HU-640 and HU-740
659.88 KB
Troubleshooting section for SC-540 printers. Chapter Six 6 in Users Manual
42.54 KB
Profiles ( 2 )
Profiles for Color RIP 2.0b for waterbased PRO2 printers and printer cutters, FJ-540, CJ-540
0.00 bytes
All profiles set up for the PRO2 and Color RIPv2.0. Multiple profiles for lc lm, Max Inks for Color RIP
0.00 bytes
Software Updates ( 1 )
Training Videos ( 2 )
Video covers Network Connectivity with a Roland printer or printercutter using InterCon-NetTool AJ, AJi, SP, SJ, FJ and SC series models only
51.85 KB
Follow this link to the Roland Academy Webinars On-Demand webpage. Then filter through the videos to find a training session that suits your needs.
57.43 KB
Troubleshooting Guides ( 2 )
How to VerifyReset the TCPIP Connection. For all nework based printers.
2.02 MB
Troubleshooting methods for VersaWorks when you have missing cut lines
654.76 KB
Utilities ( 1 )
Nettools for determining and setting IP address for SP version VersaCAMMS and Pro II printers.
4.69 MB
Knowledge Base Articles ( 23 )
Chart of color products (EcoSol/UV/Sublimation) that includes the various configurations, ink types and part numbers for ink. This article has been optimized for Mobile viewing.
COLORIP Guide
The cut path is being clipped on one side of the print
Suspect crop mark detection issues, cut offset issues
Is there a way to stop a headwash?
Motor Error 0001
Motor Error 0004
Motor Error 0009
Motor Error 0010
Motor Error 0040
Motor Error 0080
Motor Error 0090
My print and cut jobs do not line up. The cut is offset from the print.
My VersaWorks is freezing or crashing
Information about my legacy product
Roland VersaWorks Guide
Service Call 0105
Service Call 0109
Service Call 0111
The heater temperature goes up to higher than the preset temperature. (Both displayed temperature and actual temperature become higher.)
VersaWorks Measurement Failed Error Code = - 4087
When outputting a design to your printer, the software needs to be able to translate commands to the device (such as how much ink to fire and when). These commands tell the machine how fast to feed the material, at what speed the print carriage travels, and what heat settings are needed for the print platen. Other variables include theproperties of thematerial being printed on, how the ink chemsitry reacts to it, how the different process colors of ink blend together to form other colors, and how long the print takes to dry. A Profile is a combination of all of these variables, among others.
Windows 7 Software Compatibility List