Technical Support for
Search PNC-2300A Documents & Knowledge Base Articles
Expand All | Collapse All
Application & Software Guides ( 9 )
The following document details tooling specs for ADA Indoor Signage.
22.92 KB
The following document details tooling specs for Ballnose Engraving.
15.67 KB
The following document details tooling specs for burnishing.
20.65 KB
The following document details how to colorfill engraved output
22.99 KB
The following document outlines different cutter types used for engraving.
85.22 KB
The following document provides info to new users about engraving for profit.
2.45 MB
This document details which USB to Serial adapters will work with Roland units serial ports.
106.95 KB
Driver ( 2 )
Windows 10
Windows 2000, Windows XP
Driver for WindowsXP2000 Ver.3.62. Please refer to the readme.txt file for installation instructions.
695.32 KB
Firmware ( 1 )
Maintenance & Calibration Guides ( 1 )
The following zip file contains the actual file and instructions for the EGX-300 engraver and PNC-2300A bed level kit. Please refer to the instructions for proper use.
1.37 MB
Owner & User Manual ( 2 )
Product Info Guide ( 1 )
Software Updates ( 2 )
This is an updater for 3D Engrave ver. 2.70. A previous version of 3D Engrave is required for this updater to work.
47.86 KB
This is the updater for Dr. Engrave ver. 2.72. A previous version of Dr. Engrave is required for this updater to work.
54.30 KB
Knowledge Base Articles ( 4 )
HELP!! I can't find the driver I need for my Roland!
The cut path is being clipped on one side of the print
Information about my legacy product
When outputting a design to your engraver or milling machine, the software needs to be able to translate commands to the device. These commands tell the machine how fast to mill, at what revolutions per minute (RPM), and where to mill in 3D space. This is what makes up a toolpath. A Strategy is a combination of tool movements, material properties, software algorithms, and tool characteristics.